您当前所在的位置：首页 > 产品展示
新一代精确计量系统
- 闭路实时控制可实现高度精确的连续分配——可提高零件质量并减少材料浪费
- 直观的用户界面，简化了安装，缩短了培训时间
- 集成的 USB 接口便于下载数据——以便进一步分析
- 支持多喷枪，提高生产效率——最多支持四支喷枪
- 紧凑的模块化设计——易于安装、整成与维修
- 降低使用成本——与注射式计量缸相比更少的易损件，维护简单
| PCF | |
| Minumum Flow Rates | 50 cc/min with heated helical flow meter |
| Maximum Flow Rates | 22,500 cc/min with heated helical flow meter |
| Minimum Fluid Working Pressure (at regulator outlet) | 100 psi |
| Air Supply Pressure Range | 10 Micron filtration required |
| Fluid Filtration Required | 30 mesh minimum |
| Viscosity Range of Fluids | 10000 to 1000000 cps with helical flow meter |
| Minimum Dispensed Shot Size | 6 cc with heated helical flow meter |
| Wetted Parts (meters and fluid plates) | tungsten carbide, PTFE, steel, fluoroelastomer |
| Power Supply Voltage Range | 100–240 Vac, 50–60 Hz, single phase |
| Operating Humidity Range | 0 – 90% non-condensing |
| Operating Temperature Range | |
| Control Center | 40°F to 120°F |
| Heated Fluid Plate | 40°F to 400°F |
| 204 CAmbient Fluid Plate | 40°F to 120°F |
| Power Requirements | |
| 100–240 Vac | full load 1.4A, fuse rating-2.5A |
| 240 Vac | full load-4A, fuse rating-4A |
| Maximum Fluid working pressure | |
| Feed Pressure to Fluid Plate (cartridge regulator) | 6000 psi |
| Feed Pressure to Fluid Plate (mastic regulator) | 5000 psi |
| At regulator outlet | 4500 psi |
| At regulator outlet with electric heat components | 3500 psi |
密封剂
环氧密封剂和黏合剂
防尘
黏合剂粘合
汽车折边法兰粘合
密封
原位泡沫填料
电缆填充
树脂批量混合
汽车装饰和总装
动力总成
车身车间密封
喷漆车间密封
汽车电子/车罩下方
汽车复合涂料
太阳能